The build standard owns the router model and the line system; one owner per fiber
The routers order reads its model from the build standard (bstd().g, 'keep' is the old next-model-up rule) and the optical upgrade order its line system (bstd().sys). The Ops sheet shows "From the build standard: X" with a button to the sheet. Old saves move a model or line system from an order that was running into the standard when it has none of its own; a paused order's or an unhired intern's setting is dropped. opsParam refuses model/sys and points at bstdSet. The build standard's order is a generator now: every first job that takes a fiber dark goes through the optical order's routing test (opsDark, in the route worker in play), under one shared budget of dark swaps a night (two for Kevin) and the week-long memory for a failed fiber. A fiber one order worked on is the other's no more that shift, and decom keeps waves the standard just upgraded. The plan is checked at every job, since the shift rests between them: a POP gone or changed by hand meanwhile is skipped. The button still runs the whole plan at once on the page.
This commit is contained in:
parent
032470f486
commit
fbae6fc3ed
22 changed files with 573 additions and 138 deletions
|
|
@ -412,7 +412,7 @@
|
|||
"bstd.edit":"Edit the build standard",
|
||||
"bstd.every_exchange":"Wherever there is an IX",
|
||||
"bstd.fastest":"Fastest that reaches",
|
||||
"bstd.fiber_note":"A line system swap takes the fiber dark for a day: only on a quiet fiber, or where a parallel link carries its load.",
|
||||
"bstd.fiber_note_two":"A line system swap takes the fiber dark for a day. The button does it only on a quiet fiber or where a parallel link carries its load; your intern only where all the traffic gets around the fiber.",
|
||||
"bstd.from_level":"(level {lv})",
|
||||
"bstd.g_fiber":"Fiber and waves",
|
||||
"bstd.g_port":"Ports and peering",
|
||||
|
|
@ -3401,6 +3401,7 @@
|
|||
"ops.fire":"Let go",
|
||||
"ops.fired":"{name} handed in the badge and took the good stapler. Your standing orders are paused.",
|
||||
"ops.floor":"Keep at least",
|
||||
"ops.from_bstd":"From the build standard: {x}",
|
||||
"ops.good_annie":"Best at peering: works through the exchanges every day, not weekly, and orders PNIs twice a week.",
|
||||
"ops.good_kevin":"Best at maintenance: two line system swaps a night instead of one, and never a fat finger.",
|
||||
"ops.good_tracy":"Best at planning ahead: buys transit, ports, routers and optics as if traffic were already 10% higher.",
|
||||
|
|
@ -3457,7 +3458,7 @@
|
|||
"ops.o_optics":"Light more fiber",
|
||||
"ops.o_optics_d":"Add optics to dark fiber that runs hot, and light new fiber the day it is handed over.",
|
||||
"ops.o_optup":"Upgrade optical transport",
|
||||
"ops.o_optup_d":"On fiber that is full and runs hot, move the line system up a size, or trade the smallest channels for bigger optics (the old ones go on the shelf). Pick a line system, and every fiber on a smaller one is moved up to it. A line system swap takes the fiber down for a day, so only where the traffic gets around it and no customer rides it, one a night.",
|
||||
"ops.o_optup_std_d":"On fiber that is full and runs hot, move the line system up a size, or trade the smallest channels for bigger optics (the old ones go on the shelf). With a line system in the build standard, every fiber on a smaller one is moved up to it. A line system swap takes the fiber down for a day, so only where the traffic gets around it and no customer rides it, one a night together with Keep to the build standard.",
|
||||
"ops.o_pni":"PNI with the big ones",
|
||||
"ops.o_pni_d":"Every week: order a PNI with every willing network sending enough traffic at your POPs, at each network's own minimum size.",
|
||||
"ops.o_ports":"Keep peering headroom",
|
||||
|
|
@ -3465,9 +3466,9 @@
|
|||
"ops.o_repair":"Rush repairs",
|
||||
"ops.o_repair_d":"Pay for the rush repair on every outage that has one, while the budget lasts.",
|
||||
"ops.o_routers":"Keep routers ahead",
|
||||
"ops.o_routers_desc":"Add a router, or swap to the next generation where a second router carries the traffic, when load or ports pass a level. Pick a model, and every POP on a smaller one is swapped to it, the busiest first, within the budget.",
|
||||
"ops.o_routers_std_d":"Add a router, or swap to the next generation where a second router carries the traffic, when load or ports pass a level. With a router model in the build standard, every POP on a smaller one is swapped to it instead, the busiest first, within the budget.",
|
||||
"ops.o_std":"Keep to the build standard",
|
||||
"ops.o_std_d":"Bring POPs, ports and fiber up to your build standard, the busiest first, a few jobs a shift. A second router goes in before a swap, and a line system only changes on a quiet fiber.",
|
||||
"ops.o_std_around_d":"Bring POPs, ports and fiber up to your build standard, the busiest first, a few jobs a shift. A second router goes in before a swap, and a line system only changes where the traffic gets around the fiber for its day dark and no customer rides it, one a night together with Upgrade optical transport.",
|
||||
"ops.o_transit":"Keep transit headroom",
|
||||
"ops.o_transit_d":"Keep transit at each POP above a multiple of its 30-day peak: add a LAG member, or move up a port size.",
|
||||
"ops.ops":"Ops",
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue